Did a few things to the Mainboard such as Removing the crummy Barrel Jack and most importantly removing the RF Modulator from the System. Most people just desolder the Modulator block and call it done but there are two Resistors still in the circuit that can make other nearby devices inject noise into it. If you look at the schematic you will see R68 and R71. These are the two that need to be removed. You don’t have to worry about the Capacitors since C96 is a snubber cap and C22 will be out of the circuit when the Modulator block and Resistors are removed.
Other then that I am on a dead stop until I get the Component to HDMI Converter in so I can bench test it and move on. After I get the Mainboard squared away I can start on the case.
I don’t know why but this case just screams RETRO on it.
The IT Garage 